[Oct 04, 2023] Get Free Updates Up to 365 days On Developing 300-410 Braindumps
Best Quality Cisco 300-410 Exam Questions
Preparation Process for Cisco 300-410 Exam
The candidates can explore various resources in preparation for this certification exam. For this purpose, Cisco recommends enrolling for the official training course, which is Implementing Cisco Enterprise Advanced Routing and Services v1.0. This training focuses on infrastructure technologies and advanced routing. It also provides the test takers with the knowledge and skills required to installing, operating, troubleshooting, and configuring the enterprise networks. Those individuals who take the ENARSI course can choose different delivery options, which include the following:
- E-learning – This path will give the applicants 5 days of online education with hands-on lab practice;
- Instructor-led training – With this option, the test takers will have 5 days of classroom-based education with hands-on lab practice.
- Virtual instructor-led training – This variant provides the students with the web-based classes that include hands-on lab practice;
To improve your performance during the Cisco 300-410 exam, you can explore other reputable training platforms to find more prep resources. Besides that, it is important to take practice tests and gain competence in the test-taking process.
NEW QUESTION # 248
Drag and drop the MPLS VPN device types from me left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 249
Which label operations are performed by a label edge router?
- A. SWAP and PUSH
- B. PUSH and PHP
- C. PUSH and POP
- D. SWAP and POP
Answer: C
Explanation:
Explanation
A label edge router (LER, also known as that operates at the edge of an MPLS network and acts as the entry and exit points for the network. LERs push an MPLS label onto an incoming packet and pop it off an outgoing packet.
NEW QUESTION # 250
Refer to the exhibit.
Why is the remote NetFlow server failing to receive the NetFlow data?
- A. The destination of the flow exporter is not reachable.
- B. The flow exporter is configured but is not used.
- C. The flow monitor is applied to the wrong interface.
- D. The flow monitor is applied in the wrong direction.
Answer: B
NEW QUESTION # 251 
Refer to the exhibit. Which statement about R1 is true?
- A. RIP routes are redistributed to OSPF without any changes.
- B. RIP learned routes are distributed to OSPF with a tag value of one.
- C. R1 adds one to the metric for RIP learned routes before redistributing to OSPF.
- D. OSPF redistributes RIP routes only if they have a tag of one.
Answer: B
Explanation:
Section: Layer 3 Technologies
NEW QUESTION # 252
Exhibit:
Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and192.168.4.0/24 networks uses the HongKong router as the preferred router. Which set of configurations accomplishes this task?
- A. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/3
ip policy route-map PBR1 - B. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/1
ip policy route-map PBR1 - C. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/3
ip policy route-map PBR1 - D. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/1
ip policy route-map PBR1
Answer: C
Explanation:
We need to use Policy Based Routing (PBR) here on Bangkok router to match the traffic from 192.168.3.0/24 & 192.168.4.0/24 and "set ip next-hop" to HongKong router(172.18.1.2 in this case).
Note: Please notice that we have to apply the PBR on incoming interface e0/3 to receive traffic from 192.168.3.0/24 and 192.168.4.0/24.
NEW QUESTION # 253
Exhibits:
Refer to the exhibit The administrator configured the network devices for end-to-end reachability, but the ASBRs are not propagating routes to each other Which set of configurations resolves this issue?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION # 254
Refer to the exhibit.
A user has set up an IP SLA probe to test if a non-SLA host web server on IP address 10.1.1.1 accepts HTTP sessions prior to deployment. The probe is failing. Which action should the network administrator recommend for the probe to succeed?
- A. Add the control disable option to the tcp connect.
- B. Modify the ip sla schedule frequency to forever.
- C. Re-issue the ip sla schedule command.
- D. Add icmp-echo command for the host.
Answer: A
NEW QUESTION # 255
Refer to the exhibit.
A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center.
The Catalyst 9300 is added successfully However the WLC is showing [ error "uncontactable" when the administrator tries to add it in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?
- A. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again.
- B. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices.
- C. Copy the .pern file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
- D. Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-ce
NEW QUESTION # 256
Refer to the exhibit.
TCP traffic should be reaching host 10.10.10.10/24 via R2. Which action resolves the issue?
- A. Add a permit 20 statement in the route map to allow TCP traffic
- B. TCP traffic will reach the destination via R2 without any changes
- C. Allow TCP in the access list with no changes to the route map
- D. Set IP next-hop to 10.10.12.2 under the route-map permit 10 to allow TCP traffic.
Answer: C
NEW QUESTION # 257
Refer to the exhibit.
The network administrator must mutually redistribute routes at the Chicago router to the LA and NewYork routers. The configuration of the Chicago router is this:
After the configuration, the LA router receives all the NewYork routes, but NewYork router does not receive any LA routes. Which set of configurations fixes the problem on the Chicago router?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
NEW QUESTION # 258
What are two characteristics of IPv6 Source Guard? (Choose two.)
- A. requires the user to configure a static binding
- B. used in service provider deployments to protect DDoS attacks
- C. requires that validate prefix be enabled
- D. requires IPv6 snooping on Layer 2 access or trunk ports
- E. recovers missing binding table entries
Answer: C,E
Explanation:
IPv6 Source Guard uses the IPv6 First-Hop Security Binding Table to drop traffic from unknown sources or bogus IPv6 addresses not in the binding table. The switch also tries to recover from lost address information, querying DHCPv6 server or using IPv6 neighbor discovery to verify the source IPv6 address after dropping the offending packet(s).
NEW QUESTION # 259
Which mechanism must be chosen to optimize the reconvergence time for OSPF at company location 407173257 that is less CPU-intensive than reducing the hello and dead timers?
- A. OSPF demand circuit
- B. BFD
- C. SSO
- D. Dead Peer Detection keepalives
Answer: B
NEW QUESTION # 260
Drag and drop the MPLS VPN device types from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 261
Refer to the exhibit.
Which action resolves the adjacency issue?
- A. Configure the same autonomous system numbers.
- B. Match the hello interval timers.
- C. Match the authentication keys.
- D. Configure the same EIGRP process IDs.
Answer: A
NEW QUESTION # 262
Refer to the exhibit A CoPP policy is implemented to allow specific control traffic, but the traffic is not matching as expected and is getting unexpected behavior of control traffic. Which action resolves the issue?
- A. Use match-any instruction in class-map
- B. Create a separate class map lor ICMP traffic.
- C. Use default-class to match ICMP traffic
- D. Create a separate class map against each ACL.
Answer: A
NEW QUESTION # 263
Drag and drop the MPLS VPN device types from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 264
Refer to the exhibit. A network engineer receives a report that Spoke 1 users can perform bank transactions with the server located at the Center site, but Spoke 2 users cannot. Which action resolves the issue?
- A. Configure IPv6 on the routers B and C interfaces
- B. Configure encapsulation dot1q 78 on the router C interface.
- C. Configure OSPFv2 on the routers B and C interfaces
- D. Configure the Spoke 2 users IP on the router B OSPF domain
Answer: A
NEW QUESTION # 265
Refer to the exhibit.
An engineer configured SNMP communities on the Core_SW1, but the SNMP server cannot obtain information from Core_SW1. Which configuration resolves this issue?
- A. snmp-server group NETADMIN v3 priv read NETVIEW write NETADMIN access 22
- B. access-list 20 permit 10.221.10.12
- C. access-list 20 permit 10.221.10.11
- D. snmp-server group NETVIEW v2c priv read NETVIEW access 20
Answer: C
NEW QUESTION # 266
Refer to the exhibit.
The R1 and R2 configurations are:
The neighbor is not coming up. Which two sets of configurations bring the neighbors up? (Choose two.)
- A. R2
ip route 10.1.1.1 255.255.255.255 192.168.1.1
!
router bgp 200
neighbor 10.1.1.1 disable-connected-check
neighbor 10.1.1.1 update-source loopback 0 - B. R1
ip route 10.1.1.2 255.255.255.255 192.168.1.2
!
router bgp 100
neighbor 10.1.1.1 ttl-security hops 1
neighbor 10.1.1.2 update-source loopback 0 - C. R2
ip route 10.1.1.1 255.255.255.255 192.168.1.1
!
router bgp 200
neighbor 10.1.1.1 tti-security hops 1
neighbor 10.1.1.1 update-source loopback 0 - D. R1
ip route 10.1.1.2 255.255.255.255 192.168.1.2
!
router bgp 100
neighbor 10.1.1.2 disable-connected-check
neighbor 10.1.1.2 update-source Loopback0 - E. R2
ip route 10.1.1.2 255.255.255.255 192.168.1.2
!
router bgp 100neighbor 10.1.1.2 ttl-security hops 1
neighbor 10.1.1.2 update-source loopback 0
Answer: A,D
Explanation:
NEW QUESTION # 267
Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 268
Refer to the exhibit.
Which configuration denies Telnet traffic to router 2 from 198A:0:200C::1/64?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION # 269
Refer to the exhibit.
An engineer has configured DMVPN on a spoke router. What is the WAN IP address of another spoke router within the DMVPN network?
- A. 172.18.16.2
- B. 172.18.46.2
- C. 192.168.1.1
- D. 192.168.1.4
Answer: B
NEW QUESTION # 270
......
Cisco 300-410 exam covers a wide range of advanced topics related to routing and services in an enterprise network. 300-410 exam tests a candidate’s knowledge and skills in configuring, implementing, and troubleshooting advanced routing protocols such as OSPF, EIGRP, BGP, and PBR. 300-410 exam also covers advanced services such as QoS, NAT, VPN, and DMVPN. Candidates are required to have a deep understanding of these topics to pass the exam.
To prepare for the Cisco 300-410 certification exam, candidates may take advantage of various resources and training programs offered by Cisco, including instructor-led training, self-paced e-learning modules, and study groups. They may also use practice exams and study guides to improve their understanding of the exam topics and format.
Cisco Exam Practice Test To Gain Brilliante Result: https://questionsfree.prep4pass.com/300-410_exam-braindumps.html
