PDF Download Free of 200-301 Valid Practice Test Questions
200-301 Test Engine files, 200-301 Dumps PDF
Cisco 200-301 certification exam, also known as the Cisco Certified Network Associate (CCNA), is one of the most popular certification exams for IT professionals who want to build a career in networking. It is an entry-level certification that validates the knowledge and skills required to install, configure, operate, and troubleshoot medium-sized networks. 200-301 exam covers a wide range of topics, including network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability.
Cisco 200-301 exam is a valuable certification for IT professionals who want to establish their expertise in networking. It is recognized globally and is highly respected in the industry. Cisco Certified Network Associate Exam certification can open up various career opportunities, such as network administrator, network engineer, technical support specialist, and many more. It is also a prerequisite for many advanced Cisco certifications, such as the CCNP and CCIE certifications.
Cisco 200-301 exam is a certification exam that is designed to test the knowledge and skills of the candidates in the field of networking. 200-301 exam is designed for individuals who want to obtain the Cisco Certified Network Associate (CCNA) certification. The CCNA certification is an entry-level certification that is widely recognized in the IT industry, and it is a requirement for many networking jobs.
NEW QUESTION # 426
Refer to the exhibit.
If the network environment is operating normally, which type of device must be connected to interface FastEthernet 0/1?
- A. DHCP client
- B. router
- C. access point
- D. PC
Answer: A
NEW QUESTION # 427
An engineer must configure a /30 subnet between two routes. Which usable IP address and subnet mask combination meets this criteria?
- A. interface e0/0
description to XX-AXXX:XXXXX
ip address 209.165.201.2 225.255.255.252 - B. interface e0/0
description to XX-AXXX:XXXXX
ip address 192.168.1.1 255.255.255.248 - C. interface e0/0
description to XX-AXXX:XXXXX
ip address 10.2.1.3 255.255.255.252 - D. interface e0/0
description to XX-AXXX:XXXXX
ip address 172.16.1.4 255.255.255.248
Answer: A
Explanation:
Section: Network Fundamentals
NEW QUESTION # 428
Refer to the exhibit.
A network administrator assumes a task to complete the connectivity between PC A and the File Server.
Switch A and Switch B have been partially configured with VLAN 10, 11, 12, and 13. What is the next step in the configuration?
- A. Add a router on a stick between Switch A and Switch B allowing for Inter-VLAN routing.
- B. Add VLAN 13 to the trunk links on Switch A and Switch B for VLAN propagation
- C. Add PC A to VLAN 10 and the File Server to VLAN 11 fa VLAN segmentation
- D. Add PC A to the same subnet as the Fie Server allowing for intra-VLAN communication.
Answer: B
NEW QUESTION # 429
Refer to the exhibit.
Which switch becomes the root bridge?
- A. S2
- B. S4
- C. S1
- D. S3
Answer: C
NEW QUESTION # 430
Refer to the exhibit.
which path is used by the router for internet traffic ?
- A. 0.0.0.0/0
- B. 10.10.10.0/28
- C. 209.165.200.0/27
- D. 10.10.13.0/24
Answer: A
NEW QUESTION # 431
An engineer must configure neighbor discovery between the company router and an ISP
What is the next step to complete the configuration if the ISP uses a third-party router?
- A. Disable auto-negotiation.
- B. Enable LLDP globally.
- C. Disable CDP on gi0/0.
- D. Enable LLDP TLVs on the ISP router.
Answer: B
NEW QUESTION # 432
Refer to the exhibit. An engineer configured the New York router with static routes that point to the Atlanta and Washington sites. Which command must be configured on the Atlanta and Washington routers so that both sites are able to reach the loopback2 interface on the New York router?
- A. ipv6 route ::/0 Serial 0/0/0
- B. ipv6 route 0/0 Serial 0/0/0
- C. ipv6 route ::/0 2000::2
- D. ipv6 route ::/0 Serial 0/0/1
- E. ip route 0.0.0.0.0.0.0.0 Serial 0/0/0
Answer: A
Explanation:
Network + Interface (Source interface) or Next Hop (IP Address Neighbor).
So, you have 4 possibilities:
Atlanta = ipv6 route::/0 2012::2/126
or
Atlanta = ipv6 route::/0 Serial 0/0/0
_______________________________________
Washington= ipv6 route::/0 2023::2/126
or
Washington= ipv6 route::/0 Serial 0/0/0
NEW QUESTION # 433
Refer to the exhibit. What is identified by the word `switch` within line 2 of the JSON Schema?
- A. object
- B. array
- C. key
- D. value
Answer: D
Explanation:
Key-value pairs have a colon between them as in "key" : "value".
NEW QUESTION # 434
Refer to Exhibit.
An engineer is configuring the NEW York router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path. Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two)
- A. ipv6 router 2000::1/128 2012::2
- B. ipv6 router 2000::1/128 2012::1 5
- C. ipv6 router 2000::1/128 2023::2 5
- D. ipv6 router 2000::1/128 2012::1
- E. ipv6 router 2000::1/128 2023::3 5
Answer: D,E
Explanation:
Floating static routes are static routes that have an administrative distance greater than the administrative distance (AD) of another static route or dynamic routes. By default a static route has an AD of 1 then floating static route must have the AD greater than 1. Floating static route has a manually configured administrative distance greater than that of the primary route and therefore would not be in the routing table until the primary route fails.
NEW QUESTION # 435
Which resource is able to be shared among virtual machines deployed on the same physical server?
- A. applications
- B. disk
- C. VM configuration file
- D. operating system
Answer: C
NEW QUESTION # 436
Refer to the exhibit.
What is the subnet mask of the route to the 10.10.13.160 prefix?
- A. 255.255.255.240
- B. 255.255.255.128
- C. 255.255.255.248
- D. 255.255.248.
Answer: C
NEW QUESTION # 437
Refer to the Exhibit. After the switch configuration the ping test fails between PC A and PC B Based on the output for switch 1. Which error must be corrected?
- A. Access mode is configured on the switch ports.
- B. The PCs are m the incorrect VLAN
- C. There is a native VLAN mismatch
- D. All VLANs are not enabled on the trunk
Answer: C
NEW QUESTION # 438
Refer to the exhibit.
The show ip ospf interface command has been executed on R1 How is OSPF configured?
- A. A point-to-point network type is configured
- B. The default Hello and Dead timers are in use
- C. There are six OSPF neighbors on this interface
- D. The interface is not participating in OSPF
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13689-17.html
NEW QUESTION # 439
Drag and drop the network protocols from the left onto the correct transport services on the right.
Answer:
Explanation:
NEW QUESTION # 440
Refer to the exhibit. If OSPF is running on this network,how does Router 2handle traffic from Site B to 10.10.13/25 at Site A?
- A. It sends packets out of interface Fa0/1 only.
- B. It load-balances traffic out of Fa0/1 and Fa0/2
- C. It sends packets out of interface Fa0/2 only.
- D. It cannot send packets to 10.10.13 128/25
Answer: D
Explanation:
Router2 does not have an entry for the subnet 10.10.13.128/25. It only has an entry for 10.10.13.0/25, which ranges from 10.10.13.0 to 10.10.13.127.
NEW QUESTION # 441
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.
Answer:
Explanation:
NEW QUESTION # 442
Which two functions can be performed by local DNS server? (choose two)
- A. copying updated IOS images to cisco switches
- B. transferring split horizon traffic between zones
- C. forwarding name resolution requests to an external DNS server
- D. assigning IP addresses to local clients
- E. resolving names locally
Answer: C,E
NEW QUESTION # 443
Refer to the exhibit.
What is the result if Gig1/11 receives an STP BPDU?
- A. The port goes into error-disable state
- B. The port transitions to STP blocking
- C. The port transitions to the root port
- D. The port immediately transitions to STP forwarding.
Answer: A
NEW QUESTION # 444
Which implementation provides the strongest encryption combination for the wireless environment?
- A. WPA + TKIP
- B. WPA + AES
- C. WPA2 + AES
- D. WEP
Answer: C
NEW QUESTION # 445
Refer to the exhibit.
How will switch SW2 handle traffic from VLAN 10 on SW1?
- A. It drops the traffic
- B. It sends the traffic to VLAN 10
- C. It sends the traffic to VLAN 100
- D. It sends the traffic to VLAN 1
Answer: C
NEW QUESTION # 446
......
Pass Your CCNA 200-301 Exam on Dec 24, 2023 with 920 Questions: https://questionsfree.prep4pass.com/200-301_exam-braindumps.html
